The AEG LAVATHERM 57320 Dryer has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your AEG might be giving you.

1. END (EINDE) displayed shortly after program start

The drying process terminates automatically due to too dry or too little laundry for the selected program.

2. END (EINDE) display illuminated, program run display flashing

The drying process takes unusually long, 4.5 hours after the beginning: due to the SPECIAL CARE button pressed and too much laundry filled.

3. Door cannot be closed

Fluff filter has not been inserted correctly and/or the filter lid not closed.

4. Drum illumination does not work

The program selector is in the OFF (UIT) position, or the bulb needs replacing.

5. EMPTY WATER/CLEAN FILTER (RESERVOIR/ZEEF) is lit

Condensate container full or fluff filter is clogged.

6. EMPTY WATER/CLEAN FILTER (RESERVOIR/ZEEF) indicator illuminated after emptying and cleaning

Foreign bodies, such as animal hairs, can block the inlet nozzle as well as the valve on the end of the container.

7. CONDENSER (WARMTEWISSELAR) display lights

The condenser is covered with fluff, requiring cleaning.

8. Tumble dryer will not start

Potential causes include the appliance not being plugged in, a blown fuse, START/PAUSE button not pressed, no program selected, or door not properly closed.

9. Unsatisfactory drying results

Possible wrong program selection, blocked fluff filter, condenser covered with fluff, tumble dryer overloaded, or laundry not sufficiently spun.

10. Drying process takes unusually long

Condenser unit covered with fluff or fluff filter clogged.

Back to Home

AEG LAVATHERM 57320

;